Documentation and Manual
Steps for start-up:
1. Place the SLOC with the lid facing upwards on a straight surface and wait 10 seconds
Note: Ultrasonic sensor (as in the picture above) not always present
2. Pick up the SLOC and rotate it at least 2x 360° around the longitudinal axis
Note: More than 2 times rotation has no negative effect on activation
3. Transport mode is removed and the SLOC Beacon can be found by other SLOCs in range.
Note: The SBC-103 requires no setup and can be used immediately after activation
SLOC Software Handbuch (Download)
Detailed description of all functions of SLOC Device Management (Portal & App)